Monastery mill

Poldermolen Kloostermolen is a reed-covered octagonal ground-sailor on field walls. The cap is thatched, both rods are self-swinging with fairings and brake valves. The flight is 21.40 m.

Have a look now

The mill was built in 1877 to drain the Garrelweerster Kloostermolenpolder (558 ha) on the Vischkumermaar. An eight-sided ground-sailer had been built at the same location in 1816. This mill also had a flight of 21.40 m and had a screw with a diameter of 1.50 m. In 1877, this mill burned down and the current Kloostermolen was built on the same site.

Several innovations have been made since its construction in 1877. The polder board decided to replace the screw on 6 July 1889. In 1894, the mill received new rods. The first rod was fitted with self-swinging in 1908. Also in 1908, a Pot inner rod was ordered No.2102 with a length of 21.23 m. The mill has an iron axle from De Prins van Oranje 's-Hage 1877 No.1138.

From 1910, a locomotive was...

The mill was built in 1877 to drain the Garrelweerster Kloostermolenpolder (558 ha) on the Vischkumermaar. An eight-sided ground-sailer had been built at the same location in 1816. This mill also had a flight of 21.40 m and had a screw with a diameter of 1.50 m. In 1877, this mill burned down and the current Kloostermolen was built on the same site.

Several innovations have been made since its construction in 1877. The polder board decided to replace the screw on 6 July 1889. In 1894, the mill received new rods. The first rod was fitted with self-swinging in 1908. Also in 1908, a Pot inner rod was ordered No.2102 with a length of 21.23 m. The mill has an iron axle from De Prins van Oranje 's-Hage 1877 No.1138.

From 1910, a locomobile was present at the mill as an auxiliary power. This locomobile was replaced by a 35 hp electric motor in 1921. The Garrelweerster Kloostermolenpolder was drained by a second mill until 1910, but after the auxiliary steam pumping station was installed, the second mill was demolished. The Kloostermolen mill was fitted with new valves in 1936. In 1956-1957, the mill was repaired by millwright Th. Bremer en Zn. in Adorp for f.15,188. A new concrete outlet box was installed in 1960. The mill was decommissioned, after which it was dismantled and conserved by millwright Molema in 1995. Since then, the mill continued to fall into disrepair, but in 2013 the restoration of the Kloostermolen mill could be started.
On 25 October 2014, the mill was officially inaugurated.

Location: 800 m south of the village, on the west side of the Vischkumermaar.

Don’t miss a thing in Groningen

Would you like the best tips for Groningen delivered to your inbox every month? Sign up below for the Groningen newsletter